Safety
USER GUIDELINE SAFETY TIPS
How to install
It is mandatory to refer to your user manual for further information
How to assemble
Step 1 – Fitting rubber hose
- Connect the end of the hose to the regulator outlet (1)
- Fasten using hose clips (2)
- Do not over-tighten to prevent damaging the hose
Step 2 – Assembling in the Gas Cylinder
- Turn the handle clockwise to show the green symbol
- Place the Quick On Regulator onto the valve and push down firmly and vertically
- You should be able to hear a click sound, meaning it is securely fitted
Step 3 – Operation
- Turn the handle anti clockwise to show the red symbol
- Your cylinder is ready to use
How to disassemble
Step 1 – End operation
- Make sure all your gas consuming appliances are OFF
- Turn the handle clockwise to show the green symbol
Step 2 – Unplug
- Disassemble by pressing horizontally on the handle; and Pulling upwards at the same time